Actually, YA series circular vibrating screen belongs to self-centering vibrating screen and adopts the international advanced ring-grooved rivet, frame-type screen box frame structure, eccentric shaft and eccentric block vibrator, high gear transmission system, low stress damping spring and super heavy large clearance bearings, thin oil lubrication and other advanced techniques. This type of vibrating screen shows the nature of advanced structure, good grading quality and is widely used for classification of materials in beneficiation, coal cleaning, building, chemical industry, etc. Technical Data Sheet of YA Series Circular Vibrating Screen Model | Structure | Feed Particle Size （mm） | Proces-sing （t/h） | Vibra- tion time (/minute) | Double Amplitude （mm） | Motor | Overall Dimensions （mm） | Weight （kg） | Dynamic load of Each fulcrum | Max Dynamic load | Now | Original | Layer number | Area (m2) | Tilt Angle | Mesh Size (mm) | Structure | Model | Power （kw） | Inlet （N） | Outlet （N） | Inlet （N） | Outlet （N） | YA1236 | Ti412 | 1 | 4.3 | 20° | 6～50 | Weaving | ≤200 | 80～240 | 845 | 9.5 | Y160M-4 | 11 | 3757×2364×2456 | 4905 | ±802 | ±802 | ±4008 | ±4008 | 2YA1236 | 2Ti412 | 2 | 4.3 | 20° | 6～50 | Weaving up and down | ≤200 | 80～240 | 845 | 9.5 | Y160M-4 | 11 | 3757×2364×2456 | 5311 | ±802 | ±802 | ±4008 | ±4008 | YA1530 | Ti510 | 1 | 4.5 | 20° | 6～50 | Weaving | ≤200 | 80～240 | 845 | 9.5 | Y160M-4 | 11 | 3184×2670×2280 | 4675 | ±843 | ±843 | ±4214 | ±4214 | YA1536 | Ti512 | 1 | 5.4 | 20° | 6～50 | Weaving | ≤200 | 100～350 | 845 | 9.5 | Y160M-4 | 11 | 3757×2670×2419 | 5137 | ±843 | ±843 | ±4165 | ±4165 | 2YA1536 | 2Ti512 | 2 | 5.4 | 20° | 6～50 | Weaving up and down | ≤200 | 100～350 | 845 | 9.5 | Y160L-4 | 15 | 3757×3715×2437 | 5624 | ±802 | ±802 | ±4008 | ±4008 | YAH1536 | TiS512 | 1 | 5.4 | 20° | 30～150 | Punching | ≤400 | 160～650 | 755 | 9.5 | Y160M-4 | 11 | 3757×2670×2437 | 5621 | ±913 | ±913 | ±4655 | ±4655 | 2YAH1536 | 2TiS512 | 2 | 5.4 | 20° | 30～200 6～50 | Punching on the weaving | ≤400 | 160～650 | 755 | 11 | Y160L-4 | 15 | 3757×2715×2437 | 6045 | ±913 | ±913 | ±4655 | ±4655 | YA1542 | Ti514 | 1 | 6.5 | 20° | 6～50 | Weaving | ≤200 | 110～385 | 845 | 9.5 | Y160M-4 | 11 | 4311×2670×2655 | 5515 | ±802 | ±802 | ±4008 | ±4008 | 2YA1542 | 2Ti514 | 2 | 6.5 | 20° | 30～150 | Weaving up and down | ≤200 | 110～385 | 845 | 9.5 | Y160L-4 | 15 | 4331×2715×2655 | 6098 | ±802 | ±802 | ±4008 | ±4008 | YA1548 | Ti516 | 1 | 7.2 | 20° | 6～50 | Weaving | ≤200 | 120～420 | 845 | 9.5 | Y160L-4 | 15 | 4904×2715×2854 | 5918 | ±847 | ±847 | ±4234 | ±4234 | 2YA1548 | 2Ti516 | 2 | 7.2 | 20° | 6～150 | Weaving up and down | ≤200 | 120～420 | 845 | 9.5 | Y160L-4 | 15 | 4904×2715×2861 | 6321 | ±847 | ±847 | ±4234 | ±4234 | YAH1548 | TiS516 | 1 | 7.2 | 20° | 30～150 | Punching | ≤400 | 200～780 | 755 | 11 | Y160L-4 | 15 | 4904×2715×2943 | 6842 | ±1392 | ±1392 | ±6958 | ±6958 | 2YAH1548 | 2TiS516 | 2 | 7.2 | 20° | 30～150 | Punching on the weaving | ≤400 | 200～780 | 755 | 11 | Y160L-4 | 15 | 4904×2715×2943 | 7404 | ±1392 | ±1392 | ±6958 | ±6958 | YA1836 | Ti612 | 1 | 6.5 | 20° | 30～150 | Weaving | ≤200 | 140～390 | 845 | 9.5 | Y16M-4 | 11 | 3757×2975×2419 | 5205 | ±892 | ±892 | ±4460 | ±4460 | 2YA1836 | 2Ti612 | 2 | 6.5 | 20° | 30～150 | Weaving up and down | ≤200 | 140～390 | 845 | 9.5 | Y160L-4 | 15 | 3757×2975×2419 | 5946 | ±847 | ±847 | ±4234 | ±4234 | YAH1836 | TiS612 | 1 | 6.5 | 20° | 30～150 | Punching | ≤400 | 220～910 | 755 | 11 | Y160M-4 | 11 | 3757×2975×2437 | 5900 | ±980 | ±980 | ±4900 | ±4900 | 2YAH1836 | 2TiS612 | 2 | 6.5 | 20° | 30～200 6～50 | Punching on the weaving | ≤400 | 220～900 | 755 | 11 | Y160L-4 | 15 | 3757×3020×2437 | 6353 | ±980 | ±980 | ±4900 | ±4900 | YA1842 | Ti612 | 1 | 7.6 | 20° | 6～150 | Weaving | ≤200 | 140～490 | 845 | 9.5 | Y160L-4 | 15 | 4331×3020×2675 | 5829 | ±847 | ±847 | ±4234 | ±4234 | 2YA1842 | 2Ti612 | 2 | 7.6 | 20° | 6～150 | Weaving up and down | ≤200 | 140～490 | 845 | 9.5 | Y160L-4 | 15 | 4331×3020×2675 | 6437 | ±847 | ±847 | ±4234 | ±4234 | YAH1842 | TiS614 | 1 | 7.6 | 20° | 30～150 | Punching | ≤400 | 450～800 | 755 | 11 | Y160L-4 | 15 | 4331×3020×2700 | 6352 | ±928 | ±928 | ±4640 | ±4640 | 2YAH1842 | 2TiS614 | 2 | 7.6 | 20° | 30～150 | Punching on the weaving | ≤400 | 450～800 | 755 | 11 | Y160L-4 | 15 | 4331×3020×2700 | 7037 | ±928 | ±928 | ±4640 | ±4640 | YA1848 | Ti616 | 1 | 8.6 | 20° | 6～50 | Weaving | ≤200 | 150～525 | 845 | 9.5 | Y160L-4 | 15 | 4904×3020×2861 | 6289 | ±847 | ±847 | ±4234 | ±4234 | 2YA1848 | 2Ti616 | 2 | 8.6 | 20° | 6～50 | Weaving up and down | ≤200 | 150～525 | 845 | 9.5 | Y160L-4 | 15 | 4904×3020×2861 | 6624 | ±847 | ±847 | ±4234 | ±4234 | YAH1848 | Tis616 | 1 | 8.6 | 20° | 30～150 | Punching | ≤400 | 250～1000 | 755 | 11 | Y160L-4 | 15 | 4904×3023×2943 | 7122 | ±1392 | ±1392 | ±6958 | ±6958 | 2YAH1848 | 2Tis616 | 2 | 8.6 | 20° | 30～150 | Punching on the weaving | ≤400 | 250～1000 | 755 | 11 | Y160L-4 | 15 | 4904×3023×2943 | 7740 | ±1392 | ±1392 | ±6958 | ±6958 | YA2148 | Ti716 | 1 | 10 | 20° | 6～50 | Weaving | ≤200 | 180～630 | 748 | 9.5 | Y180M-4 | 18.5 | 4945×3423×3515 | 9033 | ±1675 | ±1675 | ±8379 | ±8379 | 2YA2148 | 2Ti716 | 2 | 1 | 20° | 6～50 | Weaving up and down | ≤200 | 180～630 | 748 | 9.5 | Y180L-4 | 22 | 4945×3463×3515 | 10532 | ±1675 | ±1675 | ±8379 | ±8379 | YAH2148 | Tis716 | 1 | 10 | 20° | 13～200 | Punching | ≤400 | 270～1200 | 708 | 11 | Y180M-4 | 18.5 | 4945×3423×3501 | 10430 | ±2889 | ±2889 | ±14445 | ±14445 | 2YAH2148 | 2Tis716 | 2 | 10 | 20° | 30～150 | Punching on the weaving | ≤400 | 270～1200 | 708 | 11 | Y180L-4 | 22 | 4945×3423×3674 | 11190 | ±2889 | ±2889 | ±14445 | ±14445 | YA2160 | Ti720 | 1 | 12.6 | 20° | 3～80 | Weaving | ≤200 | 230～800 | 748 | 9.5 | Y180M-4 | 18.5 | 6092×3463×3674 | 9926 | ±2495 | ±2495 | ±12475 | ±12475 | 2YA2160 | 2Ti720 | 2 | 12.6 | 20° | 6～50 | Weaving up and down | ≤200 | 230～800 | 748 | 9.5 | Y180L-4 | 22 | 6116×3619×3849 | 11249 | ±2495 | ±2495 | ±12475 | ±12475 | YAH2160 | Tis720 | 1 | 12.6 | 20° | 30～150 | Punching | ≤400 | 350～1500 | 708 | 11 | Y200L-4 | 30 | 6116×3619×3849 | 12490 | ±2889 | ±2889 | ±14445 | ±14445 | 2YAH2160 | 2Tis720 | 2 | 12.6 | 20° | 30～150 | Punching on the weaving | ≤400 | 350～1500 | 708 | 11 | Y200L-4 | 30 | 6116×3619×3849 | 13858 | ±2889 | ±2889 | ±14445 | ±14445 | YA2448 | Ti816 | 1 | 11.5 | 20° | 6～50 | Weaving | ≤200 | 200～700 | 748 | 9.5 | Y180M-4 | 18.5 | 4945×3729×3473 | 9834 | ±2495 | ±2495 | ±12475 | ±12475 | YAH2448 | Tis816 | 1 | 11.5 | 20° | 6～50 | Punching | ≤400 | 310～1300 | 708 | 11 | Y200L-4 | 30 | 4970×3925×3638 | 11830 | ±2889 | ±2889 | ±14445 | ±14445 | 2YAH2448 | 2Tis816 | 2 | 11.5 | 20° | 30～150 | Punching on the weaving | ≤400 | 310～1300 | 708 | 11 | Y200L-4 | 30 | 4970×3925×3638 | 13012 | ±2889 | ±2889 | ±14445 | ±14445 | YA2460 | Ti820 | 1 | 14.4 | 20° | 6～50 | Weaving | ≤200 | 260～780 | 748 | 9.5 | Y200L-4 | 30 | 6091×3925×3850 | 12240 | ±2495 | ±2495 | ±12475 | ±12475 | 2YA2460 | 2Ti820 | 2 | 14.4 | 20° | 6～50 | Weaving up and down | ≤200 | 260～780 | 748 | 9.5 | Y200L-4 | 30 | 6091×3925×3850 | 13583 | ±2495 | ±2495 | ±12475 | ±12475 | YAH2460 | Tis820 | 1 | 14.4 | 20° | 30～150 | Punching | ≤400 | 400～1700 | 708 | 11 | Y200L-4 | 30 | 6091×3925×3846 | 13096 | ±2889 | ±2889 | ±14445 | ±14445 | 2YAH2460 | 2Tis820 | 2 | 14.4 | 20° | 30～150 | Punching on the weaving | ≤400 | 400～1700 | 708 | 11 | Y200L-4 | 30 | 6091×3925×3846 | 14455 | ±2889 | ±2889 | ±14445 | ±14445 |
|
